2. INSTALLATION IN WINDOWS 98
This section provides you with instructions on how to install the device driver of your
Creative DSL USB 7410. It is organized as follows:
2.1
Installing the DSL 7410 Device Driver
2.2
Setting up the DSL Network Connection (optional)
2.3
Uninstalling the DSL 7410
2.1.
Installing the DSL 7410 Device Driver
While your PC is on, connect the Creative DSL USB 7410 to the PC via the USB
connector. The Windows 98 Plug-and-Play will automatically detect your Creative DSL
7410 as a new device and start an installation dialog box similar to the one shown below.
Click on Next to continue.
Page 9 of 40
Installation Guide
Creative DSL USB 7410
RFC1483