Fillauer ProCover Product Manual

ProCover
Product Manual
Intended Use
The Fillauer ProCover is made of durable and resilient polyurethane
foam that enhances performance and protects the foot module. The
split design makes the cover easy to install and remove for ease of
maintenance and cleaning. The ProCover is intended for use with
the AllPro, AllPro PM, or Wave Comfort 3.
Performance Characteristics
SkiTrek
AllPro, AllPro PM, AllPro XTS,
Compatible feet
Wave Comfort 3
Sizes 22 – 30 cm
Weight (26 cm) 9.1 oz. (259 g)
Material Polyurethane foam
Activity level K3 – K4
Storage and Handling
It is recommended that the ProCover is stored in a cool, clean,
dry environment away from harsh chemicals (chlorine, acids,
acetone, etc.).
Warranty
The ProCover is warrantied for 6 months from date of installation.
Warranty is voided by alteration, misuse of product, or failure to comply
with instructions.
Included Components
Velcro × 4
ProCover Left × 1
Connector Pin × 8
ProCover Right × 1
Replacement Components
Component Replacement Kit
Size
Includes 4 Connector Pins and 2 Velcro
22 – 25 182-10-2300
26 – 30 182-10-2350
Warnings and Precautions
CAUTION: The foot shell is waterproof to 1 meter.
However, if it is submerged, the foot and ProCover
should be rinsed with fresh water and dried immediately
to remove salt, chlorine, or debris.
CAUTION: The foot shell is designed to provide
maximum performance of the foot. The life of the foot
shell will depend on level of activity and degree to which
it is protected from wear and damage with socks and
shoes. Socks and shoes should be worn at all times and
should be allowed to dry fully after exposure to water to
prevent damage to the shell.
CAUTION: Patients should inspect the foot shell daily
for signs of cracks or holes and for the presence of sand
or other debris. If the foot shell shows signs of failure,
it should be replaced as soon as possible to prevent
damage to the carbon fiber and soling materials. If
debris is present, the foot and shell should be rinsed
and allowed too fully dry.
CAUTION: The foot shell may also be cleaned with a
soft cloth and a soap and water solution or with rubbing
alcohol (70%). Do not use acetone. It will damage the
foot shell.
Qualified Provider
Attachment, adjustment, alignment, and delivery of this device
must be performed by or under the direct supervision of a qualified
prosthetist. Unless stated in this manual, any such activities should
not be attempted by the user and will potentially void the device
warranty.
Straps
®