Fillauer Aeris
Performance 2 Product Manual
Hide thumbs Also See for Aeris Performance 2:

Advertisement

Quick Links

Aeris
Performance 2
Product Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Aeris Performance 2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Fillauer Aeris Performance 2

  • Page 1 Aeris Performance 2 Product Manual...
  • Page 2 Instructions The Aeris Performance 2 is designed to be maintenance free. The foot is water resistant; however, if the foot is submerged in water, the foot and foot shell should be rinsed with fresh water and dried immediately. The Aeris Performance 2 should be inspected every 6 months for signs of abnormal wear and that the attachment/alignment screws are secure.
  • Page 3: Product Description

    Warranty • 36 months from date of patient fitting • Foot Shell (sold separately) - 6 months from date of patient fitting The Aeris Performance 2 has been designed and manufactured for specific patient weights. Failure to follow the weight guidelines and/or overload conditions caused by the patient, such as heavy lifting, high impact sports, or abusive activities that would otherwise damage the natural limb, may void the warranty.
  • Page 4: Dynamic Alignment

    Transtibial Bench Alignment 5° The socket should be set in the proper amount of inset found in the evaluation. When using an integrated shuttle lock/distal attachment component, the plum line from the bisection of the socket at the proximal brim in the frontal and sagittal plane should bisect the ankle pyramid.
  • Page 5 • Check for smoothness of gait and ground contact throughout the stance phase of gait. • If the tibial progression is slowed from heel strike to midstance, or the heel compression is too great, dorsiflexion of foot may correct this problem. •...
  • Page 6 3.0 - Foot Shell Installation and Removal The foot features a unique cosmetic foot shell that is flexible and durable. Use care in the installation and removal of the foot shell to maintain its appearance and durability. NOTE: Never use a sharp edged tool such as a screwdriver to install or remove the foot shell.
  • Page 7: Frequently Asked Questions

    Frequently Asked Questions What can the practitioner do if the heel or toe is too soft or too firm? The heel and toe rollover resistance may be fine tuned during the dynamic alignment (section 2.1) by plantarflexing or dorsiflexing the forefoot. How long should the foot shell last? The foot shell is designed to provide realistic appearance and maximum performance of the Aeris Performance 2.
  • Page 8 Fillauer LLC 2710 Amnicola Highway Chattanooga, TN 37406 423.624.0946 www.fillauer.com Fax 423.629.7936 © 2017 Fillauer LLC M058/06-29-12/08-16-17...

Table of Contents