SRS Lighting DSD6-DIN Instruction Manual

Dmx din-rail splitter

Advertisement

DMX DIN-rail Splitter
Instruction Manual
Models:
DSD6-DIN
version 1.0 since 3 February 2020
ATTENTION!
This instruction manual contains important information about the installation and the use of
the equipment. Please read and follow these instructions carefully.
Always ensure that the power to the equipment is disconnected before opening the
equipment or commencing any maintenance work.
DSD6-DIN_en_manual_M059.doc
( 1 / 4)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DSD6-DIN and is the answer not in the manual?

Questions and answers

Summary of Contents for SRS Lighting DSD6-DIN

  • Page 1 DMX DIN-rail Splitter Instruction Manual Models: DSD6-DIN version 1.0 since 3 February 2020 ATTENTION! This instruction manual contains important information about the installation and the use of the equipment. Please read and follow these instructions carefully. Always ensure that the power to the equipment is disconnected before opening the equipment or commencing any maintenance work.
  • Page 2 IMPORTANT SAFETY INFORMATION The following general safety precautions have to be observed during all phases of operation, service, and the repair of this equipment. Failure to comply with these precautions or with specific warnings in this manual violates safety standards of design, manufacture, and the intended use of this equipment. Do not operate in an explosive atmosphere! Do not operate this equipment in the presence of flammable gases or fumes.
  • Page 3 Device in use / service: By default, Power LED indicates the device is on main power. When the Power LED is off, check the main power input. When the DMX cable is connected to the device, LED marked as DATA go on. Speed of light on this LED also indicates the refresh rate of DMX signal.
  • Page 4 Name of producer: SRS Group s.r.o. Address of producer: Rybnicna 36/D, SK- 83106 Bratislava, Slovak Republic Declares that the product Name of product: DSD6-DIN 6-way DMX splitter Type: DSD6-DIN Corresponds to the following product specifications: Safety: EN60065, resp. EN 60950 EMC: EN55103-1, resp.

Table of Contents