Table of Contents
Advertisement
Quick Links
DST8-DIN
8-way DMX Splitter
Instruction Manual
Models:
DST8-3-DIN, DST8-5-DIN
DST8-C-DIN
version 1.0 since 2 June 2017
ATTENTION!
This instruction manual contains important information about the installation and the use of
the equipment. Please read and follow these instructions carefully.
Always ensure that the power to the equipment is disconnected before opening the
equipment or commencing any maintenance work.
DST8_en_manual_M089
( 1 / 8)
Advertisement
Table of Contents
Related Manuals for SRS Lighting DST8-DIN Series
Summary of Contents for SRS Lighting DST8-DIN Series
- Page 1 DST8-DIN 8-way DMX Splitter Instruction Manual Models: DST8-3-DIN, DST8-5-DIN DST8-C-DIN version 1.0 since 2 June 2017 ATTENTION! This instruction manual contains important information about the installation and the use of the equipment. Please read and follow these instructions carefully. Always ensure that the power to the equipment is disconnected before opening the equipment or commencing any maintenance work.
- Page 2 IMPORTANT SAFETY INFORMATION Failure to comply with these precautions or with specific warnings in this manual violates safety standards of design, manufacture, and the intended use of this equipment. Do not operate this equipment in the presence of flammable gases or fumes. Operation of any electrical instrument in such an environment constitutes a definite safety hazard.
- Page 3 Front panel description: DIN rail holder: DIN rail terminals are located on the rear side of DST8-DIN splitter. C-clamp + Securing point: DST8-DIN splitter is also equipped with M10x20 point for C-clamp and Securing eye connection point. These points are located on the right side of the device. C-clamp is not included in the device.
- Page 4 Device in use: By default, Power LED indicates the device is on main power. If there is no power light present, please check the main power input. If the DMX cable is connected to the device, LEDs marked as D+ and D- go on for side marked as DMX input, thru and this indicates that DST8 is receiving the DMX signal.
- Page 5 Technical data Mains input: AC 100-255V /50-60Hz/ 15W DMX Input / Output: 8x USITT DMX512 /RS485/ isolated to 1000V, amplified Size/Weight: Metal box with powder coating: 240x100x135mm /without accessories/ 1.7 kg Mounting points: DIN rail holder located on the rear side M10x20 C-clamp holder point M6 securing eye holder point Package consist of:...
- Page 6 ( 6 / 8)
- Page 7 ( 7 / 8)
- Page 8 Copyright 2017 SRS Group, s.r.o. | Specifications subject to change without notice. Document: DST8_en_manual_M089 | Version 1.0 | Actual as of: 2 June 2017 SRS Group s.r.o. Rybnicna 36/D | 831 07 Bratislava | Slovakia Phone: +421 2 44 681 417 | Fax: +421 2 4468 1419 Email: sales@srs-group.com | www.srs-group.com ( 8 / 8)
Need help?
Do you have a question about the DST8-DIN Series and is the answer not in the manual?
Questions and answers