Table of Contents
Advertisement
Quick Links
iGENT DMX/RS232
Converter
Instruction Manual
Models:
iGENT-3
iGENT-5
version 1.0 since 3 February 2020
ATTENTION!
This instruction manual contains important information about the installation and the use of
the equipment. Please read and follow these instructions carefully.
Always ensure that the power to the equipment is disconnected before opening the
equipment or commencing any maintenance work.
iGENT_en_manual_M117
( 1 / 12)
Advertisement
Table of Contents
Related Manuals for SRS Lighting iGENT-3
Summary of Contents for SRS Lighting iGENT-3
- Page 1 DMX/RS232 Converter Instruction Manual Models: iGENT-3 iGENT-5 version 1.0 since 3 February 2020 ATTENTION! This instruction manual contains important information about the installation and the use of the equipment. Please read and follow these instructions carefully. Always ensure that the power to the equipment is disconnected before opening the equipment or commencing any maintenance work.
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION The following general safety precautions have to be observed during all phases of operation, service, and the repair of this equipment. Failure to comply with these precautions or with specific warnings in this manual violates safety standards of design, manufacture, and the intended use of this equipment. -
Page 3: Front Panel
Front panel: Rear panel: Function description iGENT is a device that functions as a multifunction converter from DMX to RS232 commands. The main feature is easy control user interface which helps to create and program new commands into the device. iGENT was originally developed to control the DMX projectors, Plasma TV displays and other equipment with RS232 or RS422 port. - Page 4 iGENT application manual Please install the iGENT application. Please start the iGENT application Click File New project and name it: Then save it on local disk: ( 4 / 12)
- Page 5 Please use mouse and make right click in My Project window. There will be displayed window with device manufacturer name: You will see new manufacturer folder there. Here you can add various device per same manufacturer. With right click on New Manufacturer you can add new device and setup communication parameters ( 5 / 12)
- Page 6 Speed/Data bits/Stop bits/Parity and Handshake: These details are specified in device manual Delay time: says what delay is between receive of DMX command to send the RS232/RS422 command Normal reply: When this reply is received there isn’t RS232 command resended Error reply: when this or no reply is received –...
- Page 7 Now please click by right button of mouse inside DMX window. Next dialog will be displayed is DMX channel which trigger the command DMX: Low / High value: 1-512 – command will be sent when there is DMX value of 1-521 128-512 : command will be sent when DMX value is greater than 50% RS232 command: This will be sent out from RS232/RS422 –...
- Page 8 How to save the config file of iGENT: Please click to iGENT HW>SAVE. Now your file that will be sent via USB is saved on local disk. How to send config file to HW of iGENT: Click iGENT HW> SEND iGENT and select file /with.bin/ you like to send to the iGENT hardware ( 8 / 12)
- Page 9 Click OPEN and file will be sent via USB. If there is no USB connected or there is no power on iGENT this dialog will be displayed: Then reconnect power, check POWER led and USB cable connected to computer. iGENT firmware update The iGENT device needs to be updated to latest firmware via USB to perform smooth operation Connect iGENT to the PC via USB cable...
- Page 10 Click OPEN and in bottom corner select Firmware files Firmware files will be displayed. Please select iGENT_ver.1.4.fw and click OPEN ( 10 / 12)
- Page 11 Firmware files will be displayed. Please select iGENT_ver.1.4.fw and click OPEN. You will see the firmware file link in File: Now press Send: You will see progress bar and the information window will be displayed. ( 11 / 12)
-
Page 12: Technical Data
Technical data Main input: Weight: AC 100-255V / 50-60Hz / 5W 1.7 kg DMX Input / Output: Temperature of use: 1x USITT DMX512 /RS485/ isolated up to 1000V -10 ºC… +45 º C Housing/Size: Warranty: Lightweight Aluminum box with powder coating Two-Year /24-month/ 234x154x62mm warranty...
Need help?
Do you have a question about the iGENT-3 and is the answer not in the manual?
Questions and answers