Page 1
10-way IP DMX Splitter Instruction Manual Models: DSR10IP version 1.0 since 3 February 2020 ATTENTION! This instruction manual contains important information about the installation and the use of the equipment. Please read and follow these instructions carefully. Always ensure that the power to the equipment is disconnected before opening the equipment or commencing any maintenance work.
Page 2
IMPORTANT SAFETY INFORMATION The following general safety precautions have to be observed during all phases of operation, service, and the repair of this equipment. Failure to comply with these precautions or with specific warnings in this manual violates safety standards of design, manufacture, and the intended use of this equipment. Do not operate in an explosive atmosphere! Do not operate this equipment in the presence of flammable gases or fumes.
Page 3
When you connect the DMX cable to device, LEDs marked as D+ and D- go ON for side marked as > and this indicates that DSR10IP is receiving the DMX signal. Speed of light on these LEDs also indicates the refresh rate of DMX signal. Fast blinking –...
Page 4
Name of producer: SRS Group s.r.o. Address of producer: Rybnicna 38/B, SK- 83108 Bratislava, Slovak Republic Declares that the product Name of product: 10-way waterproof DMX splitter Type: DSR10IP Corresponds to the following product specifications: Safety: EN60065, resp. EN 60950 EMC: EN55103-1, resp. EN55103-2...
Need help?
Do you have a question about the DSR10IP and is the answer not in the manual?
Questions and answers