Page 1
DST 4-way DMX/AC Power Splitter Instruction Manual Models: DST4H-3, DST4H-5, DST4H-C Version 1.0 since 3 February 2020 ATTENTION! This instruction manual contains important information about the installation and the use of the equipment. Please read and follow these instructions carefully.
Page 2
IMPORTANT SAFETY INFORMATION The following general safety precautions have to be observed during all phases of operation, service, and the repair of this equipment. Failure to comply with these precautions or with specific warnings in this manual violates safety standards of design, manufacture, and the intended use of this equipment. Do not operate in an explosive atmosphere! Do not operate this equipment in the presence of flammable gases or fumes.
Page 4
Device in use / service: By default, Power LED indicates the device is on main power. When the power light is off please check the main power input. When this does not solve the problem please call the assistance first and then open DST4H and check fuses on the main board.
Page 5
DECLARATION OF CONFORMITY According to guidelines 89/336 EEC and 92/31 EEC: Name of producer: SRS Group s.r.o. Address of producer: Rybnicna 38/B, SK- 83107 Bratislava, Slovak Republic Declares that the product Name of product: DST4H 4-way DMX/AC power splitter Type: DST4H Corresponds to the following product specifications: Safety: EN60065, resp.
Need help?
Do you have a question about the DST4H-3 and is the answer not in the manual?
Questions and answers