Page 1
10-way DMX Splitter Instruction Manual Models: DSR10-3, DSR10-5, DSR10-C version 1.0 since 9 June 2017 ATTENTION! This instruction manual contains important information about the installation and the use of the equipment. Please read and follow these instructions carefully. Always ensure that the power to the equipment is disconnected before opening the equipment or commencing any maintenance work.
Page 2
IMPORTANT SAFETY INFORMATION The following general safety precautions have to be observed during all phases of operation, service, and the repair of this equipment. Failure to comply with these precautions or with specific warnings in this manual violates safety standards of design, manufacture, and intended use of this equipment. Do not operate in an explosive atmosphere! Do not operate this equipment in the presence of flammable gases or fumes.
Page 3
Controls and indication 1. DMX input signalization 2. DMX input/output connectors 3. Termination switch 4. DMX output signalization 5. DMX output connector Device Design Front panel: Rear panel: Device use / servicing: The ON LED indicator indicates the device is on the main power. All other data indication LEDs being off mean no incoming signal.
Need help?
Do you have a question about the DSR10-3 and is the answer not in the manual?
Questions and answers