Unpacking The System; Placement Options - Boston Acoustics VS Series Manual

Unpacking the System

Carefully unpack the speakers. If there is any sign of damage from transit, report it immediately to your dealer and/or delivery service.
Keep the shipping carton and packing materials for future use.
The high-gloss finish of the VS Series cabinets is protected during shipment with a clear plastic film. Remove the film by lifting up a
corner and carefully pulling it off. Repeat the procedure for all cabinet surfaces.
NOTE: The cloth grilles remain on the speaker during normal use. However, to remove a VS grille, place your fingers gently on edge
of the grille and starting at one end of the speaker, pry along the length of the speaker until the grille pops off. To replace the grille,
fit one long edge into position, and then gently push the other long side of the grille against the cabinet until the grille snaps into
place.

Placement Options

VS 336, VS 344 – These are classic floor standing "tower" speakers. For best sound balance place it near an open wall surface, at least
3 feet (1m) away from the corners of the room.
VS 325C – This model is designed specifically for use as a center channel speaker in an A/V system. It should be centered on the television
as close as possible to the screen. It can be placed either above or below the screen, on a shelf or wall mounted with the supplied bracket.
Avoid placing the speaker in a semi-enclosed location. Such placement can produce undesirable sound characteristics.
VS 224, VS 260, VS 240 – These models can be used as the left, right, center or surround speakers in a stereo or multi-channel
system. They can also be used as the left/right speakers in a stereo-only system. Each can be placed on a tabletop or a shelf, or
wall-mounted using the supplied mounting bracket. The adjustable foot and the mounting bracket allow for vertical or horizontal
orientation and optimal positioning.
3