f.
Remove the WLAN antenna cables and transceivers (4).
The WLAN antenna cables and transceivers are included in the Antenna Kit, spare part number
809815-001.
11.
If it is necessary to replace the webcam/microphone module cable:
a.
Remove the display panel assembly.
b.
Remove the right display hinge.
c.
Remove the WLAN antenna cables and transceivers.
d.
Release the tabs (1) on the top edge, right side, and right hinge area of the display enclosure that
secure the webcam/microphone cable.
e.
Release the webcam/microphone module cable from the retention clips (2) and channels built into
the right edge of the display enclosure.
42
Chapter 5 Removal and replacement procedures