Subscribe to Our Youtube Channel
Related Manuals for Teltonika Telematics FMC250
Summary of Contents for Teltonika Telematics FMC250
- Page 1 FMC250 Advanced watter resistant tracker with CAN data reading feature Quick Manual v1.0...
-
Page 2: Table Of Contents
CONTENT Know your device ........................................3 Pinout ...........................................4 FMC250-QJIB0 Wiring scheme ...................................5 Set up your device ......................................6 PC Connection (Windows) ....................................7 How to install USB drivers (Windows) ................................7 Configuration (Windows) ....................................8 Quick SMS configuration ....................................10 Mounting recommendations ..................................12 Basic characteristics ......................................13 LED indications ......................................... -
Page 3: Know Your Device
KNOW YOUR DEVICE TOP VIEW BOTTOM VIEW (WITHOUT COVER) TOP VIEW (WITHOUT COVER) MICRO SOCKET ANTENNA NAVIGATE GNSS BATTERY STATUS MICRO SIM ANTENNA SOCKET SLOT Quick Manual v1.0 // FMC250... -
Page 4: Pinout
PINOUT PIN NUMBER PIN NAME DESCRIPTION VCC (10-30) V DC (+) Power supply (+10-30 V DC) Digital input, channel 3 / DIN 3 / AIN 2 Analog input, channel 2, Input range: 0-30 V DC Digital output, channel 3 with DIN2-N / AIN1 ground sense / Analog input, chanel 1. -
Page 5: Fmc250-Qjib0 Wiring Scheme
FMC250-QJIB0 WIRING SCHEME FMC150-QJB0 WIRING SCHEME IGNITION CAN BUS DETECTION ALARM BUTTON DIN2 MULTIPLE AIN2 CAN1L CAN1H TEMPERATURE SENSORS IBUTTON RELAY CAN2L CAN2H DIN1 1WIRE DATA DIN2-N/AIN1 DOUT2 DIN3/AIN2 DOUT1 FUEL GAUGE +10...30 V DC BUZZER LED LIGHTS ANALOG POWER SUPPLY LLS SENSOR 10 - 30V DC STARTER... -
Page 6: Set Up Your Device
Wiki how to enter it later in Teltonika Configurator . Make sure that Micro-SIM card cut-off corner is pointing outward from slot. SIM slot 1 is closer to PCB, SIM slot 2 is the top one. -
Page 7: Pc Connection (Windows)
. Choose your device named – “FMC250_last_7_imei_digits”, without LE in the end. Enter default ® password 5555, press Connect and then select Done. You are now ready to use the device on your computer. wiki.teltonika-gps.com/view/FMC250_LED_status 1 Page 7, "How to install USB drivers" 2 ... -
Page 8: Configuration (Windows)
CONFIGURATION (WINDOWS) At first FMC250 device will have default factory settings set. These settings should be changed according to the users needs. Main configuration can be performed via Teltonika Configurator software. Get the latest Configurator version from here . Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. - Page 9 Data Acquisition – where data acquiring parameters can be configured. More details about FMC250 configuration using Wiki Configurator can be found in our wiki.teltonika-gps.com/view/FMC250_Status_info wiki.teltonika-gps.com/view/FMC250_Status_info#GNSS_Info wiki.teltonika-gps.com/view/FMC2501_Status_info#GSM_Info wiki.teltonika-gps.com/view/FMC250_Status_info#I.2FO_Info wiki.teltonika-gps.com/view/FMC250_Status_info#Maintenance wiki.teltonika-gps.com/index.php?title=FMC250_GPRS_settings After connection to Configurator Status window will be wiki.teltonika-gps.com/index.php?title=FMC250_Data_acquisition_...
-
Page 10: Quick Sms Configuration
QUICK SMS CONFIGURATION Default configuration has optimal parameters present to ensure best performance of track quality and data usage. Quickly set up your device by sending this SMS command to it: « setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0» Note: Before SMS text, two space symbols should be inserted. GPRS SETTINGS: 2001 –... - Page 11 After successful SMS configuration, FMC250 device will synchronize time and update records to configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator SMS parameters wiki.teltonika-gps.com/view/Teltonika_Configurator wiki.teltonika-gps.com/view/Template:FMC_Device_Family_Parameter_list Quick Manual v1.0 // FMC250...
-
Page 12: Mounting Recommendations
MOUNTING RECOMMENDATIONS CONNECTING WIRES • Wires should be fastened to the other wires or non-moving parts. Try to avoid heat emitting and moving objects near the wires. • The connections should not be seen very clearly. If factory isolation was removed while connecting wires, it should be applied again. -
Page 13: Basic Characteristics
LED INDICATIONS CAN STATUS LED INDICATIONS BEHAVIOUR MEANING NAVIGATION LED INDICATIONS Blinking very fast FW is being flashed for CAN IC The flashed FW image is corrupted BEHAVIOUR MEANING Fast blinking or not found Permanently GNSS signal is not received Short blink and long No CAN configuration uploaded in switched on... - Page 14 ® Impuls Inputs Digital Input 2) Bluetooth LE: -3.17dBm ® Analog Inputs FMC250-QJIB0: 2 POWER 10-30 V DC with overvoltage wiki.teltonika-gps.com/view/FMC250_Sleep_modes#Ultra_Deep_Sleep_ 1 Input voltage range mode protection wiki.teltonika-gps.com/view/FMC250_Sleep_modes#Deep_Sleep_mode 2 170 mAh Li-Ion battery 3.7 V (0.63 teltonika-gps.com/view/FMC250_Sleep_modes#Online_Deep_Sleep_ 3 Back-up battery mode wiki.teltonika-gps.com/view/FMC250_Sleep_modes#GPS_Sleep_mode...
- Page 15 DOUT Control (without battery) Call, Excessive Idling detection, Scenarios Immobilizer, iButton Read Storage temperature Notification, Unplug detection, -40 °C to +85 °C (without battery) Towing detection, Crash detection, Auto Geofence, Manual Geofence, Trip wiki.teltonika-gps.com/view/FMC250_Accelerometer_Features_settings 6 Quick Manual v1.0 // FMC250...
-
Page 16: Electrical Characteristics
ELECTRICAL Sleep, Online Deep Sleep, Deep Sleep modes Sleep, Ultra Deep Sleep CHARACTERISTICS FOTA Web FOTA Teltonika Configuration and Configurator (USB, Bluetooth ® firmware update wireless technology), FMBT mobile VALUE application (Configuration) CHARACTERISTIC DESCRIPTION MIN. TYP. MAX. UNIT Configuration, Events, DOUT control,... - Page 17 VALUE VALUE CHARACTERISTIC CHARACTERISTIC DESCRIPTION DESCRIPTION MIN. TYP. MAX. UNIT MIN. TYP. MAX. UNIT Input resistance (DIN3) kΩ Input voltage threshold Input voltage Sink current Supply (Recommended voltage Operating Conditions) CAN INTERFACE Input Voltage threshold Internal terminal (DIN1) resistors CAN bus (no Ω...
-
Page 18: Safety Information
SAFETY INFORMATION Do not disassemble the device. If the device is damaged, the power supply cables are not isolated or the isolation is damaged, DO NOT touch the device before unplugging the power supply. This message contains information on how to operate FMC250 All wireless data transferring devices produce safely. -
Page 19: Certification And Approvals
® trademarks owned by Bluetooth SIG, Inc. and any use of such marks by UAB Teltonika Telematics is under license. Other trademarks and trade names are those of their respective owners. CHECK ALL CERTIFICATES... -
Page 20: Warranty
Warranty does not apply to any consequential damages. • Warranty is not applicable for supplementary product equipment (i. e. PSU, power cables, antennas) unless the accessory is defective on arrival. • More information on what is RMA wiki.teltonika-gps.com/view/RMA_guidelines Quick Manual v1.0 // FMC250...
Need help?
Do you have a question about the Telematics FMC250 and is the answer not in the manual?
Questions and answers