Meta System M43J User Manual

Immobiliser

Hide thumbs Also See for M43J:

M43J(T) Immobiliser

User Guide

MSM43J(T)UG1902020

Table of Contents

Need help?

Do you have a question about the M43J and is the answer not in the manual?

Page 1 M43J(T) Immobiliser User Guide MSM43J(T)UG1902020...
Page 2 The M43 is a self-arming dual circuit Immobiliser that prevents un-authorised starting of your vehicle. By using a non-factory immobiliser your vehicle is protected from theft by Relay Attack and/or Key Cloning. You should have received from your installer: ID-Tag Service Key Window Stickers The Red code cards attached the ID-Tags may be discarded...
Page 3 ARMING: Approx. 15 seconds after Ignition OFF the immobiliser will ARM and the LED will flash every 2 seconds. If the Ignition is switched ON without pressing the ID-Tag button the Immobiliser LED will become ON solid to indicate the immobiliser is still armed. DISARMING: Once inside the vehicle press the button of the ID-Tag and start the vehicle within 8 seconds;...
Page 4 To set the immobiliser into Valet mode insert the service key into the receptable momentarily; the LED will give one long flash to confirm. The immobiliser will now remain in a disarmed state until the service key is used again. Thereafter, the immobiliser will return to automatic arming mode.

M43jt