Max Mbx Mini - peplink PEPWAVE MAX Series User Manual

2.20 MAX MBX Mini

2.20.1 Panel Appearance
Note:
- For proper Wi-Fi performance and operations, please ensure all 4 Wi-Fi antenna
connectors (labeled Wi-Fi 1 and Wi-Fi 2) have antennas attached.
-
The LED indicators of Wi-Fi 1 & 2 shown as below is referring to the default settings of
Wi-Fi Operation mode is WAN + AP under the AP. For more details, please refer to the
section 25.4
2.20.2 LED Indicators
The statuses indicated by the front panel LEDs are as follows:
OFF – Power off
Power LED
GREEN
Right Green
Left Orange
https://www.peplink.com
LED Indicator
– Power on
Ethernet WAN Ports
OFF Port is not connected or slowed than 1000 Mbps
ON Gigabit speed
OFF Port is not connected
Blinking Data is transferring
ON Port is connected without traffic
47 Copyright @ 2021 Peplink