TP-Link Archer VX1800v User Manual page 95

Chapter 14
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to Advanced
3. Select your WAN
4. Enable Multiple NAT.
5. Choose a NAT Mode: Server/One-One/Many-One/Many-Many. Then set the basic
information about the mode.
• Server - Configure a specific WAN IP. All the LAN packets will pass through the
WAN by this IP setting.
• One-One - Configure a specific LAN IP to correspond to a specific WAN IP.
Packets of the specific LAN IP will pass through the WAN by this specific WAN
IP setting.
• Many-One - Configure a segment of LAN IPs to correspond to a specific WAN
IP. Packets of this segment of LAN IPs will pass through the WAN by this specific
WAN IP setting.
• Many-Many
specific segment of WAN IPs. Packets of this segment of LAN IPs will pass
through the WAN by this specific WAN IP setting. The specified WAN IPs can
be less than LAN IPs. The Many-Many profile will work as several Many-One
profiles each of which binds several LAN IPs with one WAN IP.
6. Click Save.
> NAT Forwarding >
Connection.
- Configure the specific segment of LAN IPs to correspond to the
Multiple NAT.
NAT Forwarding
90