Chapter 17
17. 1. Set Up System Time
System time is the time displayed while the modem router is running. The system time
you configure here will be used for other time-based functions like Parental Controls
and Wireless Schedule. You can manually set how to get the system time.
Follow the steps below to set your system time.
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the modem router.
2. Go to
Advanced
3. Select your local
manually. You can also click
automatically.
4. Enable NTP. In the
desired NTP Server.
5. (Optional) In the
second NTP Server.
6. Click Save.
7. After setting the system time, you can set
needs. Click
Enable Daylight Saving
Save
to make the settings effective.
>
System Tools
>
Time Settings
Time Zone
from the drop-down list and enter your local time
Get from PC
NTP Server I
field, enter the IP address or domain name of your
NTP Server II
field, enter the IP address or domain name of the
Time, set the start and end time and then click
Administrate Your Network
page.
or
Get from the Internet
Daylight Saving Time
to get local time
according to your
114