Table of Contents
Advertisement
Chapter 17
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to
Advanced
3. Turn on
Enable Session Timeout
4. Fill in
TCP Session
connection is not active, the connection will be cleared. The default value is 432000
seconds.
5. Fill in
UDP Session
not respond, the connection will be cleared. The default value is 30 seconds.
6. Fill in
UDP Stream
respond, the connection will be cleared. The default value is 180 seconds.
>
System Tools
>
Session Timeout
Settings.
Timeout. After the specified time, if the established TCP
Timeout. After the specified time, if the UDP connection does
Timeout. After the specified time, if the UDP connection does not
Administrate Your Network
Settings.
126
- Quick Links:
- Use Quick Setup Wizard
Hide quick links:
Advertisement
Table of Contents
