Flow Classification - TP-Link Archer VX1800v User Manual

Chapter 12
3 ) Enable the priority of queue class which is more important and get throught
more quickly.

12. 2. Flow Classification

Flow Classification allows you to add classification rules to choose certain kind of
packages to enter a queue. The classification of packages is based mainly on the
differences of data link layer header, network layer header, transport layer header and
so on. An option should be empty if you don't want to use it for a classification.
To add a new classification:
1 ) Click Add.
2 ) Enter the Class
3 ) Select Ingress
from this interface.
4 ) Enter Source MAC Address
Please note that only LAN mac address can take effect.
5 ) Select a 802.1P Priority
6 ) Enter the Source IP address
7 ) Enter the DSCP
DSCP.
8 ) Enter the Protocol. Classification will only take effect at packets of this protocol.
Name. Each classification has a unique name as its identification.
Interface. Classification will only take effect at packets ingressing
and Destination MAC Address
Check.
and Destination IP address
Check. Classification will only take effect at packets having this
QoS
for classification.
for classification.
73