TP-Link Archer VX1800v User Manual page 10

Chapter 1
Name
Power
DSL
Internet
Wireless
LAN
Phone
Note:
1. If the DSL LED is off, please check your internet connection. Refer to
information about how to connect to the internet correctly. If you have already made a successful connection, please
contact your ISP to make sure your internet service is available now.
2. If the Internet LED is off, please check your DSL LED first. If your DSL LED is also off, please refer to
DSL LED is ON, reconnect your modem router correctly by referring to related guide.
Status
On System initialization is complete.
The system is initializing or the firmware is being
Slow
upgraded. Do not disconnect or power off the modem
Flashing
router.
Quick
WPS connection is in progress (about 2 minutes).
Flashing
Power is off. Please ensure that the power adapter is
Off
connected correctly.
On DSL synchronization is complete.
Flashing DSL synchronization is in progress.
DSL synchronization failed. Please refer to
Off
troubleshooting.
Solid Green Internet service is available.
Internet connection is incorrect, DSL synchronization
failed, or the modem router is operating in Bridge mode.
Off Please refer to
DSL/EWAN port is connected but internet service is
unavailable.
On The wireless 2.4GHz/5GHz band is working properly.
Off The wireless 2.4GHz/5GHz band is disabled.
At least one LAN port is connected to a powered-on
On
device.
Off No LAN port is connected to a powered-on device.
On The phone is off-hook.
Flashing The phone is ringing.
Off The phone is on-hook.
Indication
Note 2 for troubleshooting.
Connect Your Modem Router
Note 1 for
for more
Note 1. If your
5