TP-Link Archer VX1800v User Manual page 121

Chapter 17
3. Enter the information:
1 ) Choose Ping,
connectivity.
• Ping is used to test the connectivity between the router and the tested host,
and measure the round-trip time.
• Traceroute is used to display the route (path) your router has passed to reach
the tested host, and measure transit delays of packets across an Internet
Protocol network.
• Nslookup is used to query the Domain Name System (DNS) to obtain the
mapping between a domain name and IP address, or other DNS records.
2 ) Enter the IP Address
3 ) Click Advanced.
4 ) Choose an interface name.
5 ) Modify the Ping Count
keep the default value.
6 ) If you have chosen Traceroute, you can modify the
recommended to keep the default value.
4. Click START to run the test.
The figure below indicates the proper connection between the router and the Yahoo
server (www. Y ahoo.com) tested through Ping.
Traceroute or Nslookup
or Domain Name
number and the
Administrate Your Network
as the diagnostic tool to test the
of the tested host.
Ping Packet Size. It's recommended to
Traceroute Max TTL. It's
116