Installing the front system fan
1
Align the front system fan to its retention slot in the system chassis.
2
Replace the screw that secures the front system fan to the chassis.
3
Connect the fan cable to the system board.
4
Route the following cables through the cable holder and connect to the system board:
•
SATA and ODD cables
•
USB 3.1 cable
5
Install the:
a
PCIe holder
b
front bezel
c
side cover
6
Follow the procedure in
System board
Removing system board
1
Follow the procedure in
2
Remove the:
a
side cover
b
air shroud
c
expansion card
d
memory module
e
heat sink and CPU fan assembly
f
front bezel
g
ODD
h
5.25 ODD bracket
i
system fan
j
PCIe card holder
3
To remove the system board:
a
To remove the system fan fixed bracket, remove the screw [1] that secure the fixed bracket to the system board.
b Lift the system fan fixed bracket from the system board [2].
52
Removing and installing components
After working inside your
computer.
Before working inside your
computer.