Onplus Network Agent Status Leds - Cisco ON100 Network Agent Quick Start Manual

OnPlus Network Agent Status LEDs

6
The STATUS 1 and STATUS 2 LEDs on the front panel of the
OnPlus Network Agent indicate the progress of the device during power
on, restart, software upgrade, and reset operations.
Status LEDs
Power On and Initialization
1 Steady Amber
STATUS
2 Steady Amber
1 2
1 Steady Amber
STATUS
2 Off
1 2
1 Steady Amber
STATUS
2 Blinking Amber
1 2
1 Steady Amber
STATUS
2 Off
1 2
Software Download and Upgrade
1 Blinking Red
STATUS
2 Blinking Red
1 2
1 Steady Green
STATUS
2 Steady Amber
1 2
8
Description
Power-on sequence.
Starting software initialization.
Acquiring an IP address.
If this pattern displays for more than two
minutes, it indicates that the OnPlus
Network Agent has failed to obtain an IP
address.
If a static IP is configured, this pattern is
never displayed for more than 10
seconds.
Completing software initialization.
Downloading and installing the base
software image (requires Internet
connection).
You will only see this pattern prior to
activation (during out-of-box installation)
or after a factory reset.
Upgrading software (requires Internet
connection).
Cisco ON100 Network Agent Quick Start Guide