Table of Contents
Advertisement
Chapter 3: Device Configuration
NOTE: It is important to note that VAP 15 is to be used only for Second IP Stack data.
Accessing the MOTOMESH Duo Device Recovery Settings in
MeshManager
Procedure 3-1 Accessing the MOTOMESH Duo Device Recovery Settings
Select a specific device from the Device Tree in MeshManager.
1
2
From the right side of the screen, select Global Configuration from the Action drop-down list.
Select the Device Recovery tab.
3
View the Default VAP 15 Settings setup for the purpose of device recovery.
4
You can choose to keep the default settings or change them after your wireless network is setup,
5
configured, and working correctly.
Device Recovery Settings
The MOTOMESH Duo device recovery default settings (VAP 15) have the following conditions:
Authentication Type– WPA-AUTO-PSK
Cipher Mode-
Passphrase-
Static IP Address-
IP network mask-
SSID-
SSID Suppression-
If you change any of the default settings for VAP15, make sure that when it is time
to recover your MOTOMESH Duo Device that the Client Access Card is set to
match your current network settings for Device Recovery (VAP15).
May 2007
AUTO
blackd0g
192.168.1.1
255.255.255.0
MotoMesh
On
3-2
Advertisement
Table of Contents
