Table of Contents
Advertisement
help resolve an issue.
By default, the page displays 100 warning messages from the logs.
Typically, Avigilon Technical Support assists you to access and filter the logs on this panel to isolate the logs
that they require. You then copy and paste the logs into a text file, save it and send it to Avigilon Technical
Support.
You can filter the logs to display the information that you need:
1. In the drop down list, select the type of application log that you need. The options are:
Exception Logs
o
FCP Logs
o
Server Logs
o
WebEndpoint Logs
o
2. In the Maximum Logs drop down list, select the number of log messages you want to display each
time.
3. Enter text in the Filter field to apply a filter to the log listings.
4. Click the Sync button to display the updated logs.
Rebooting the Device and Managing Device Settings
On the Device panel use the:
General pane to:
l
Reboot the device from the ACC ES Admin Web UI. You can monitor the progress of the
l
device as it reboots from the ACC ES Admin Web UI launch page (see . For more infomation
see,
Launching the ACC ES Admin Web UI on
Select a Language for the ACC ES Admin Web UI from the drop down list.
l
Hostname pane to enter a new Hostname. Click Apply to make the change.
l
The default hostname is the same as the server name. The server name is in the form <Model>-
<Serial Number>
Password pane to change the administrator password:
l
Note: You cannot change the default administrator username on the ACC ES Admin Web UI,
only the password.
1. To change your password, confirm your identity by entering your current password in the Old
Password field.
2. Enter the new password in the New Password field.
3. Re-enter the new password in the Confirm Password field.
Rebooting the Device and Managing Device Settings
page 18).
22
Advertisement
Table of Contents
