Chapter 3: Device Configuration; Pre-Staging A Motomesh Duo 4300 Device In Meshmanager; Second Ip Stack Aids In Troubleshooting; Second Ip Stack Settings - Motorola MOTOMESH DUO 4300 User Manual

Chapter 3: Device Configuration

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
This chapter includes the following sections:
-

Pre-staging a MOTOMESH Duo 4300 device in MeshManager

- Second IP stack in MOTOMESH Duo Devices
Pre-staging a MOTOMESH Duo 4300 Device in
MeshManager
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
This information will be available the week of 5-14-07 and will be reviewed by Craig Perkins and
probably someone in the System Test group.

Second IP Stack Aids in Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The second IP Stack feature is available in MOTOMESH 2.0 Duo 4300 devices and allows for a pre-
configured SSID and connectivity to a fixed IP. This feature can assist you with correcting and
diagnosing some cases of stranded units rather than having to roll a bucket truck. Operators will find
this feature helpful when configuring nodes for expansion or replacement.

Second IP Stack Settings

A MOTOMESH Duo device can be accessed via a client access card (a PCMCIA Wireless Client
Card) that is attached to a laptop computer. The client access card must be set to the settings specified
in MeshManager for Device Recovery.
May 2007
.
.
.
.
.
.
.
.
3-1
Chapter
3