Other Information; Connecting To Your Mobile Device Via Wifi; Bluetooth Connectivity - VESTEL 55UA9300 Operating Instructions Manual

This means that the connection is now
established. To disconnect from a wireless
network, highlight Network Type and press
Left or Right buttons to set as Disabled.
Highlight Internet Speed Test and press the
OK button to check your internet connection
speed. Highlight Advanced Settings and
press the OK button to open the advanced
setting menu. Use directional and numeric
buttons to set. Press the OK button to save
settings when complete.

Other Information

The status of the connection will be displayed
as Connected or Not Connected and
the current IP address, if a connection is
established.

Connecting to your mobile device via WiFi

• If your mobile device has WiFi feature, you
can connect it to your TV via a router, in
order to access the content in your device.
For this, your mobile device must have an
appropriate sharing software.
• Connect to your router following the steps
stated above in the Wireless Connectivity
section.
• Afterwards, engage your mobile device with
the router and then activate the sharing
software on your mobile device. Then,
select files that you want to share with your
TV.
• If the connection is established correctly,
you will be able to access the shared files
from your mobile device via the Media
Browser of your TV.
• Enter the Media Browser menu and the
playback device selection OSD will be
displayed. Select your mobile device and
press the OK button to continue.
• If available, you can download a virtual
remote controller application from the
server of your mobile device application
provider.
NOTE: This feature may not be supported
on all mobile devices.

Bluetooth Connectivity

Your TV supports Bluetooth technology. A
pairing is required before using the Bluetooth
devices with the TV set. You should do the
followings to pair your device with the TV:
• Set the device to pairing mode
• Start device discovery on the TV
NOTE: Refer to the user manual of the
Bluetooth device to learn how to set the
device to pairing mode.
You can connect audio devices or remote
controllers via Bluetooth to your TV. For
audio devices you should use the Audio
Link option in the System>Sound menu, for
remote controllers the Smart Remote option
in the System>Options>More menu. Select
the menu option and press the OK button
to open the related menu. Using this menu
you can discover and connect the devices that
use Bluetooth wireless technology and start to
use them. Follow the on-screen instructions.
Start the device discovery. A list of available
bluetooth devices will be displayed. Select
the device you want to connect from the
list and press the OK button to connect. If
"Device connected" message is displayed,
the connection is successfully established. If
the connection fails try it again.
NOTE: Bluetooth and Wireless LAN devices
operate within the same radio frequency
range and may interfere with one another. To
improve the performance of your Bluetooth
device place it at least 1 meter away from any
other Bluetooth or Wireless LAN devices.
English - 92 -