Media Browser Menu; Loop/Shuffle Mode Operation - VESTEL 55UA9300 Operating Instructions Manual

hard disk drives/memory sticks may not be
compatible with this TV. The TV supports
FAT32 and NTFS disk formatting.
While formatting USB hard drives which have
more than 1TB (Tera Byte) storage space
you may experience some problems in the
formatting process.
Wait a little while before each plugging and
unplugging as the player may still be reading
files. Failure to do so may cause physical
damage to the USB player and the USB
device itself. Do not pull out your drive while
playing a file.
You can use USB hubs with your TV's USB
inputs. External power supplied USB hubs are
recommended in such a case.
It is recommended to use the TV's USB
input(s) directly, if you are going to connect
a USB hard disk.
NOTE: When viewing image files the Media
Browser menu can only display 1000 image
files stored on the connected USB device.

Media Browser Menu

You can play photo, music and movie files
stored on a USB disk by connecting it to your
TV. Connect a USB disk to one of the USB
inputs located on the side of the TV. Pressing
the Menu button while in the Media Browser
mode will access the Picture, Sound and
Settings menu options. Pressing the Menu
button again will exit from this screen. You
can set your Media Browser preferences by
using the Settings menu.
Loop/Shuffle Mode
Operation
Start playback with
the Play button and
activate
Start playback with
the OK button and
activate
Start playback with
the Play button and
activate
Start playback with
the Play button and
activate
Custom Boot Up Logo
You can personalize your TV and see your
favorite image or photo on the screen each
time your TV boots up. To do this, copy
your favorite image files into a USB disk and
open them from the Media Browser menu.
When you have chosen the desired image,
highlight it and press OK to view it in full
screen. Press OK again to choose the image
as custom logo. A confirmation message will
be displayed. Select Yes and press OK again.
If the image is suitable(*) you will see it on the
screen during the TV's next boot up.
NOTE: If you perform a First Time Installation
the TV will return to using the default logo,
if any.
(*) Images must have an aspect ratio between
4:3 to 16:9 and they must be in .jpeg, .jpg or
.jpe file formats. The image cannot be set as
boot logo, which's resolution doesn't appear
on the info banner.
English - 76 -
All files in the list
will be continuously
played in original
order
The same file will be
played continuously
(repeat)
All files in the list will
be played once in
random order
All files in the list
will be continuously
played in the same
,
random order.