PROBLEM
No display.
Displaying,
no sound.
Display is bad in
computer mode.
Sound is received
from one speaker
only.
Remote control
does not work.
CAUSE
Means that your TV doesn't
receive any broadcast.
Antenna might have been
connected incorrectly.
Antenna cable might be
damaged.
Incorrect connectors might
be used for connecting the
antenna.
Incorrect buttons might have
been pressed on the remote
control.
Correct input source might
not have been selected.
TV might be muted.
Screen resolution and set-
tings of computer and TV
might be incompatible.
Balance set might be adjust-
ed to one direction extreme.
Battery may have been dis-
charged.
Batteries might have been
inserted incorrectly.
There might be a barrier
between remote and TV.
English - 102 -
REMEDY
Make sure that you have broadcast on your TV.
Make sure antenna is connected correctly.
Make sure antenna cable isn't damaged.
Have an authorized person check antenna
connection is made correctly.
Retry and make sure you press the correct
buttons.
Make sure you have selected the correct input.
To cancel the mute option, press the button or
turn up the volume.
Change resolution information on your com-
puter.
Check from audio menu section.
Replace the batteries.
Check the directions of batteries and make sure
you install them correctly.
Remove the barrier.