Tv Menu Contents - VESTEL 55UA9300 Operating Instructions Manual

J

TV Menu Contents

J
System - Picture Menu Contents
3D Settings
Mode
Contrast
Brightness
Sharpness
Colour
Energy Saving
Backlight
Advanced Settings
Dynamic Contrast
Noise Reduction
Colour Temp
White Point
Picture Zoom
Movie Sense
Film Mode
Skin Tone
Colour Shift
HDMI Full Range
PC Position
Press to view 3D settings.
You can change the picture mode to suit your preference or requirements. Picture mode can
be set to one of these options: Cinema, Game, Sports, Dynamic and Natural.
Pixellence Demo Mode: While Mode option is highlighted, Pixellence demo mode
will be displayed bottom of the menu screen. Pixellence function optimizes the
TV's video settings and helps to acquire a better image quality. Press OK to start
Pixellence demo mode to experience Pixellence quality. Press OK button to cancel
(except Game Mode).
Adjusts the light and dark values on the screen.
Adjusts the brightness values on the screen.
Sets the sharpness value for the objects displayed on the screen.
Sets the colour value, adjusting the colours.
For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto,
Screen Off or Off.
NOTE: Available options may differ depending on the selected Mode.
This setting controls the backlight level. The backlight function will be inactive if the
Energy Saving is set to an option other then Custom.
You can change the dynamic contrast ratio to desired value.
If the signal is weak and the picture is noisy, use the Noise Reduction setting to
reduce the amount of noise.
Sets the desired colour temperature value. Cool, Normal, Warm and Custom
options are available.
If the Colour Temp option is set as Custom, this setting will be available. Increase the
'warmth' or 'coolness' of the picture by pressing Left or Right buttons.
Sets the desired image size format.
Movie Sense: Press Use "Left" / "Right" to set Movie Sense Low, Med, High or Off.
While Movie Sense is active, it will optimize the TV's video settings for motional images
to acquire a better quality and readability.
When Movie Sense option is set to Low, Med or High, Movie Sense demo option will be
available. If one of these options is selected and if you press OK button, then the demo
mode starts. While demo mode is active, the screen will be divided into two sections, one
displaying the movie sense activity, the other displaying the normal settings for TV screen.
Films are recorded at a different number of frames per second to normal television programmes.
Turn this feature on when you are watching films to see the fast motion scenes clearly.
Skin tone can be changed between -5 and 5.
Adjust the desired colour tone.
While watching from a HDMI source, this feature will be visible. You can use this feature
to enhance blackness in the picture.
Appears only when the input source is set to VGA/PC.
English - 78 -