Operating The 3D Mode; Using The 3D Glasses; Cleaning And Maintenance Of The 3D Glasses; Viewing 3D Images - VESTEL 55UA9300 Operating Instructions Manual

• While watching the 3D TV, do take frequent
breaks.
• If you suffer from any eyesight problems
(short / far-sighted, astigmatism, eyesight
differences in left and right), ensure to
correct your vision before using the 3D
glasses.
• Do not watch the TV too closely and try
always keep the television at eye level. Do
not watch the 3D TV when you are tired or
sick. Avoid watching the 3D TV for a long
period of time.

Operating the 3D Mode

Press the MENU button on the remote and
select the System>Picture icon. Press OK
button to view Picture Settings menu. Use
Up or Down buttons to select 3D Settings
and press OK to view. For quick acces to 3D
Settings menu just press the 3D button on
the remote (if available).
NOTES:
• You should select suitable 3D Mode before
viewing. If appropriate mode is not selected,
3D image can not be correctly displayed.
• The 3D picture may not be visible or
become distorted when watching under
intense light conditions.
• If you experience screen flickering when
watching 3D images in poor light conditions,
you should turn the lamp off or dim the light.
• Bluetooth™ and Wireless LAN devices
operate within the same radio frequency
range and may interfere with one another.
If you use Bluetooth™ and Wireless
LAN devices simultaneously, you may
occasionally experience a less than optimal
network performance. Use the 3D glasses
where there is no interference from other
Bluetooth™ or Wireless LAN devices.

Using the 3D Glasses

Refer to the manual of the 3D glasses before
use for detailed information and instructions
on usage.
Before using you should pair the glasses
with your TV. Press the power button on the
glasses to turn it on. You can enjoy viewing
3D images now by wearing the 3D glasses.
Turn off the glasses after using it.
The 3D eyewear may not operate correctly
out of the viewing range. Use the 3D glasses
within the viewing range. The range may
be shortened depending on the obstacles
between the TV and the 3D glasses, or the
surrounding environment.
Cleaning and maintenance of the 3D
glasses
• Do not apply spray cleaners directly onto
the surface of the 3D glasses.This may result
in discoloration and cracks and may cause
the screen display to peel off.
• Make sure the cleaning cloth is soft and
does not contain any foreign material or
dust. Using a dirty cloth will damage your
3D glasses.
• Do not drop or bend the 3D glasses.

Viewing 3D images

Incoming video signals can either be in 2D
or 3D format. A 2D signal can be viewed
in either 2D or 3D, and 3D can be viewed
in either 2D or 3D. If the 3D Mode option
in the 3D Settings menu is set to Auto, the
TV can detect the 3D signal and change
to 3D mode automatically. Otherwise you
can change the viewing mode from the 3D
Settings menu manually. Press the 3D button
on the remote (if available) for quick access
to the 3D Settings menu.
The format of the 3D signal can be either
Side By Side (SBS) or Top Bottom (TB).
English - 87 -