Configuring Wireless Device Settings; Other Information; Connecting To Your Mobile Device Via Wifi; Wireless Display - VESTEL 50UB8300 Operating Instructions Manual

Configuring Wireless
Device Settings
Open the Network/Internet Settings menu
and select Network Type as Wireless Device
to start connection process.
The TV will scan the wireless networks
automatically. A list of available networks
will be displayed. Please select your desired
network from the list.
NOTE: If the modem supports N mode, you
should set N mode settings.
If the selected network is protected with a
password, please enter the correct key by using
the virtual keyboard. You can use this keyboard
via the directional buttons and the OK button
on the remote control.
Wait until the IP address is shown on the screen.
This means that the connection is now
established. To disconnect from a wireless
network, highlight Network Type and press
Left or Right buttons to set as Disabled.
Highlight Internet Speed Test and press the
OK button to check your internet connection
speed. Highlight Advanced Settings and press
the OK button to open the advanced setting
menu. Use directional and numeric buttons
to set. Press the OK button to save settings
when complete.

Other Information

The status of the connection will be displayed as
Connected or Not Connected and the current
IP address, if a connection is established.
Connecting to your mobile device via
WiFi
• If your mobile device has WiFi feature, you
can connect it to your TV via a router, in order
to access the content in your device. For this,
your mobile device must have an appropriate
sharing software.
• Connect to your router following the steps
stated above in the Wireless Connectivity
section.
• Afterwards, engage your mobile device with the
router and then activate the sharing software on
your mobile device. Then, select files that you
want to share with your TV.
• If the connection is established correctly, you
will be able to access the shared files from
your mobile device via the Media Browser
of your TV.
• Enter the Media Browser menu and the
playback device selection OSD will be
displayed. Select your mobile device and press
the OK button to continue.
• If available, you can download a virtual
remote controller application from the
server of your mobile device application
provider.
NOTE: This feature may not be supported
on all mobile devices.

Wireless Display

Wireless Display is a standard for
streaming video and sound content by
Wi-Fi Alliance. This feature provides the
ability to use your TV as wireless display
device.

Using with mobile devices

There are different standards which
enable sharing of screens including
graphical, video and audio content
between your mobile device and TV.
Plug the wireless USB dongle to TV
first, if the TV doesn't have internal WiFi
feature.
Then press the Source button on the
remote and switch to Wireless Display
source.
English - 87 -