System Audio Control - VESTEL 55UA9300 Operating Instructions Manual

FollowMe TV
With your mobile device you can stream
the current broadcast from your smart TV
using the FollowMe TV feature. Install the
appropriate Smart Center application to your
mobile device. Start the application.
For further information on using this feature
refer to the instructions of the application
you use.
Note: This application may not be compatible
with all mobile devices. Both of the devices
must be connected to the same network.
CEC and CEC RC Passthrough
This function allows to control the CEC-e-
nabled devices, that are connected through
HDMI ports by using the remote control of
the TV.
The CEC option in the System>Options>-
More menu should be set as Enabled at
first. Press the Source button and select the
HDMI input of the connected CEC device
from the Sources List menu. When new CEC
source device is connected, it will be listed in
source menu with its own name instead of the
connected HDMI ports name(such as DVD
Player, Recorder 1 etc.).
The TV remote is automatically able to per-
form the main functions after the connected
HDMI source has been selected.
To terminate this operation and control the
TV via the remote again, press Quick Menu
button on the remote, highlight the CEC
RC Passthrough and set as Off by pressing
Left or Right button. This feature can also be
enabled or disabled under the System>Op-
tions>More menu.
The TV supports also ARC(Audio Return
Channel) feature. This feature is an audio
link meant to replace other cables between
the TV and the audio system (A/V receiver
or speaker system).
When ARC is active, TV does not mute its
other audio outputs automatically. So you
need to decrease TV volume to zero manu-
ally, if you want to hear audio from connected
audio device only (same as other optical or
co-axial digital audio outputs). If you want to
change connected device's volume level, you
should select that device from the source list.
In that case volume control keys are directed
to connected audio device.
NOTE: ARC is supported only via the
HDMI3 input.

System Audio Control

Allows an Audio Amplifier/ Receiver to
be used with the TV. The volume can be
controlled using the remote control of the
TV. To activate this feature set the Speakers
option in the System>Options>More menu
as Amplifier. The TV speakers will be muted
and the sound of the watched source will be
provided from the connected sound system.
Note: The audio device should support Sys-
tem Audio Control feature and CEC option
should be set as Enabled.
E-Manual
You can find instructions for your TV's fea-
tures in the E-Manual.
To use E-Manual, press to the Info button
while main menu is displayed on the screen
or press Quick Menu button, select Infor-
mation Booklet and press OK.
By using the directional buttons select a
desired category. Every category includes
different topics. Select a topic and press OK
to read instructions.
To close the E-Manual screen press the Exit
or Menu button.
Note: The contents of the E-Manual may
vary according to the model.
English - 77 -