Media Playback Via Usb Input; Media Browser Menu; Custom Boot Up Logo - VESTEL 50UB8300 Operating Instructions Manual

Additionally you can download one of the
SatcoDx files stored in USB device, to the TV.
When you select one of these files, all services
and related satellites and transponders in
the selected file will be stored in the TV. If
there are any installed terrestrial, cable and/
or analog services, they will be kept and only
satellite services will be removed.
Afterwards, check your antenna settings and
make changes if necessary. An error message
stating "No Signal" may be displayed if the
antenna settings are not configured properly.

Media Playback via USB Input

You can connect 2.5" and 3.5" inch (hdd with
external power supply) external hard disk
drives or USB memory stick to your TV by
using the USB inputs of the TV.
IMPORTANT! Back up the files on your
storage devices before connecting them to
the TV. Manufacturer will not be responsible
for any file damage or data loss. Certain types
of USB devices (e.g. MP3 Players) or USB
hard disk drives/memory sticks may not be
compatible with this TV. The TV supports
FAT32 and NTFS disk formatting.
Wait a little while before each plugging and
unplugging as the player may still be reading
files. Failure to do so may cause physical
damage to the USB player and the USB
device itself. Do not pull out your drive while
playing a file.
You can use USB hubs with your TV's USB
inputs. External power supplied USB hubs are
recommended in such a case.
It is recommended to use the TV's USB
input(s) directly, if you are going to connect
a USB hard disk.
NOTE: When viewing image files the Media
Browser menu can only display 1000 image
files stored on the connected USB device.

Media Browser Menu

You can play photo, music and movie files
stored on a USB disk by connecting it to your
TV. Connect a USB disk to one of the USB
inputs located on the side of the TV. Pressing
the Menu button while in the Media Browser
mode will access the Picture, Sound and
Settings menu options. Pressing the Menu
button again will exit from this screen. You
can set your Media Browser preferences by
using the Settings menu.
Loop/Shuffle Mode Operation
Start playback with the
Play button and
activate
Start playback with the
OK button and activate
Start playback with the
Play button and
activate
Start playback with the
Play button and
activate

Custom Boot Up Logo

You can personalize your TV and see your
favorite image or photo on the screen each
time your TV boots up. To do this, copy
your favorite image files into a USB disk and
open them from the Media Browser menu.
When you have chosen the desired image,
highlight it and press OK to view it in full
screen. Press OK again to choose the image
as custom logo. A confirmation message will
be displayed. Select Yes and press OK again.
If the image is suitable(*) you will see it on the
screen during the TV's next boot up.
English - 75 -
All files in the list will be
continuously played in
original order
The same file will be
played continuously
(repeat)
All files in the list will be
played once in random
order
All files in the list will
be continuously played
in the same random
,
order.