Fimco LG-40-4-3PT Owner's Manual page 2

Step 1
Install the lower hitch pins into the tabs of the front
frame weldment. Place these pins through the holes in
the tabs, slip the lock washers on and thread the nuts
onto the pin. Tighten securely.
Step 3
** After positioning the tank on the assembled frame,
bolt it down to the side members with the supplied (4)
5/16" x 5/8" flange lock screws. These 4 screws will go
through the frame and up into the (4) 'threaded inserts'
in the bottom of the tank.
***DO NOT OVERTIGHTEN***
Page 2
Assembly Instructions: LG-40-4-3PT (5302941)
Step 2
Bolt the frame together as shown.
Attach RH side plate to the front frame weldment us-
ing (3) 5/16"-18 x 3/4" Flange Whiz Lock Screw and
(3) 5/16"-18 Hex Whiz Nut.
Attach back tie plate to RH side plate using (2) 5/16"-
18 x 3/4" Flange Whiz Lock Screw and (2) 5/16"-18
Hex Whiz Nut.
Repeat procedure for LH side plate.
Attach Boom Support Bars using (2 each) 5/16"-18 x
3/4" Flange Whiz Lock Screws and (2 each) 5/16"-18
Hex Whiz
Step 4
Next, attach the tank straps over the tank and secure
them in place using (2 each) 5/16"-18 x 1" Flange Hex
Bolts and (2 each) 5/16"-18 Hex Whiz Nuts.