Safety Alert Faq's - Petzl ASTRO BOD FAST Quick Start Manual

Safety Alert FAQ's

Where can I find the serial number of my harness?
The serial number is located on the plastic label inside the belt.
Does this apply to all colours of metal D?
Yes.
Do I have to dismantle my gated ventral attachment point to perform this inspection?
No.
I have a lanyard installed on my harness. Do I have to remove it?
No.
Do I need to check that the screws are tightened to the correct torque?
No, for this inspection, torque has no impact.
I've never used my harness, do I need to inspect it?
Yes.
I'm already using my harness, do I need to inspect it?
Yes.
Is it necessary to apply high pressure on the pin to detect this defect?
No, just a little pressure is necessary.
During the test, the pin does not slide but I notice a slight play, is this normal?
Yes, this is a normal functional play.
Have there been any injuries with the products affected by this information?
To date, no injuries have been reported.
Reproduced by Spelean Pty Ltd as distributor for Petzl Professional Products in Australia