Inspection and Test Procedure
ASTRO BOD FAST & ASTRO SIT FAST
1) Prepare for the test:
In accordance with the instructions for use, check that the 2
screws are present and correctly installed.
Remove any accessories mounted in the shackle
connection holes.
2) Perform the test below:
The pin does not slide:
The pin slides out completely:
CANYON GUIDE
1) Prepare for the test:
In accordance with the instructions for use, check that
the 2 screws are present and correctly installed
2) Perform the test below:
The pin does not slide:
The pin slides out completely:
Need help?
Do you have a question about the ASTRO BOD FAST and is the answer not in the manual?