Sunbeam EMM7300 User Manual page 27

Fine tuning your espresso
- The current pre-infusion profile will
displayed.
- The preprogrammed settings can be
scrolled through by pressing the single
shot button.
- To save the selected profile
press the MANUAL BUTTON.
Restore – factory brew settings
- Press & hold all 3 EXTRACTION
BUTTONS at the same time for 3
seconds.
- The Origins Espresso Machine will beep
and all 3 EXTRACTION BUTTON LIGHTS
will flash together.
- The default espresso volumes have been
restored.
- The Origins Espresso Machine
will return to the READY state.
Customisable – Grinder Time Adjustments
Due to a number of reasons, such as a
changing your type of coffee bean, it may
be that you want to adjust the factory
settings for the amount of coffee dispensed
for each dose. Adjusting the grinder in
the following manner will change all 30
grinder position settings at the same time,
increasing or decreasing how long the
grinder operates for by the same amount
proportionally.
Note: If you want to add a small amount
of extra grounds to your shot, you
don't have to adjust your settings as
described below, you can simply top
up the grinds in your Group Handle
using the manual grind function on the
grinder (push the Group Handle handle
down, and hold).
- Starting from the READY state, press
and hold the single and double shot
brew buttons at the same time whilst
simultaneously pushing down
on the Group Handle handle. for 3
seconds.
PUSH
HANDLE
DOWN
27