Sunbeam EMM7300 User Manual page 18

Troubleshooting guide
PROBLEM Possible cause
Coffee grinds
Grind Setting not correct.
are coarse
when on a fine
Grind Setting
Top Burr not seated correctly. Coffee
beans or grinds are caught around &
under the Top Burr.
Grinder Calibration needs resetting.
Grind Setting
The Bean Hopper is not seated
correctly.
cannot be
adjusted
Coffee beans or grinds are caught
around the Top Burr or Grinder
Collar.
Bean Hopper
Grinder Collar not aligned to the Top
cannot be
Cover.
locked into
Coffee beans or grinds are caught in
position
the Top Burr or Grinder Collar.
The Top Burr is not seated correctly.
Top Burr does
Coffee beans or grinds are caught
not sit in the
around & under the Top Burr.
Grinder Collar
correctly
The Top Burr is not seated correctly.
Grinder burrs
These are part of the hardening
have small
process (for extra-long life). These
spots and
marks do not affect the performance
marks
of the Grinder or the taste of the
espresso.
18
What to do
Adjust the Grind Settings by turning the
Bean Hopper. See Tips for Grinding, &
Extraction.
Top burr needs removing and the areas
cleaning, before reinstalling.
See Grinder Recalibration.
Remove the Bean Hopper & reinstall.
Remove the Bean Hopper & Top Burr.
Use the Cleaning Brush or Vacuum
Cleaner as necessary to clear loose
coffee beans or grinds.
Ensure markings on Top Cover and
Grinder are lined up.
Remove the Bean Hopper & Top Burr.
Use the Cleaning Brush or Vacuum
Cleaner as necessary to clear loose
coffee beans or grinds.
Make sure the Top Burr is correctly
aligned and that the handle is folded
down.
Remove the Top Burr and replace the
Bean Hopper. Hold the Bean Hopper
down with your hand, do not turn. Insert
the Group Handle into the Grinding
Cradle and push down to activate the
Grinder. The coffee grinds will fall out
the Grind Outlet.
Make sure the Top Burr is correctly
aligned and that the handle is folded
down.
No action needed.