Before First Use - Sunbeam EMM7300 User Manual

Before First Use

Use below information to help with the first time set up.
1. Wash & Dry Parts
Wash the Milk Jug, Filter Baskets, Group
Handle, Bean Hopper, Top Burr, Tamper and
Water Reservoir in warm water with a mild
detergent. Rinse and allow thorough air drying.
5. Insert & Set Bean Hopper
1. ALIGN & INSERT
Insert & turn Hopper to set Grind Setting.
As a starting point try Grind Setting 15.
Note: For further Grind Setting adjustment see Extraction Guide.
7. Prime Machine
TWO CUP
Insert Two Cup Filter Basket
into Group Handle.
10
Note: Turning Group Handle might be tight for first few uses.
2. Insert Top Burr
Use the handle to
insert Top Burr, rotating
clockwise to lock.
2. TURN TO SET
GRIND
SETTING
Fill with roasted coffee beans.
INSERT
2. TURN
1. ALIGN & INSERT
Insert Group Handle into Press TWO CUP BUTTON.
Group Head, turn to centre. Allow water to run through
until it stops.
3. Drip Tray & Accessories Storage Tray
Assembly of drip tray and accessory
tray into position.
6. Remove Red Plug, and set up Water Reservoir
Remove the red plug at the bottom of the water reservoir and safely
discard. Place the charcoal filter into the holder and insert it into the
reservoir. Fill reservoir with water and install.
Turn DIAL to STEAM
and run for 20 sec.
4. Start Up
Plug in at socket. Flick power
switch downwards, the switch
will return to centre. Indicator
light will pulse during heat up.