Fluke 374 Specifications

374 and 375 True-rms
AC/DC Clamp Meters
Work horse clamps with increased
performance and flexibility
The new Fluke 374 and 375 clamp meters offer improved
performance perfect for many current measurement situa-
tions. With true-rms ac voltage and current measurements,
the Fluke 374 and 375 can read up to 600 V and 600 A in
both ac and dc modes. Additionally, both are compatible with
the new iFlex flexible current probe (sold separately) which
™
expands the measurement range to 2500 A ac and pro-
vides increased display flexibility, ability to measure around
awkward sized conductors and improved wire access.
®
C US

Technical Data

Measurement capability
• 600 A ac and dc current
measurement with fixed jaw
• 2500 A ac current mea-
surement with iFlex
™
flexible current probe (sold
separately)
• 600 V ac and dc voltage
measurement
• True-rms ac voltage and
current for accurate measure-
ments on non-linear signals
• Frequency measurement to
500 Hz with both jaw and
iFlex (Fluke 375 only)
™
• Resistance measurement to
60 kΩ (Fluke 375) or 6000 Ω
(Fluke 374) with continuity
detection
• Min, max, average and inrush
recording to capture varia-
tions automatically
• 500 mV dc measurement
range to interface with other
accessories (Fluke 375 only)
• 1000 µF capacitance
measurement
Features
• iFlex flexible current probe
™
expands the measurement
range to 2500 A ac while
providing increased display
flexibility, ability to measure
awkward sized conductors
and improved wire access
• CAT IV 600V, CAT III 1000 V
safety rating
• Integrated low pass filter
(Fluke 375 only) and state
of the art signal process-
ing allows for use in noisy
electrical environments while
providing stable readings