Fluke 376 Specifications

376 True-rms AC/DC
Clamp Meter with iFlex
Work horse clamps with increased
performance and flexibility
The new Fluke 376 Clamp Meter offers improved performance
perfect for a wide range of current measurement situations.
With true-rms ac voltage and current measurements, the Fluke
376 can read up to 1000 V and 1000 A in both ac and dc modes.
Additionally, the Fluke 376 includes the new iFlex
probe expanding the measurement range to 2500 A ac while
providing increased display flexibility, ability to measure around
awkward sized conductors and improved wire access. The Fluke
376 is the direct replacement for the Fluke 337 Clamp Meter.
™
flexible current
™
®
C US

Technical Data

Measurement capability
• 1000 A ac and dc current
measurement with fixed jaw
• 2500 A ac current measure-
ment with iFlex flexible
™
current probe
• 1000 V ac and dc voltage
measurement
• True-rms ac voltage and
current for accurate measure-
ments on non-linear signals
• Frequency measurement to
500 Hz with both jaw and
iFlex
™
• 60 kΩ resistance measure-
ment with continuity
detection
• Min, max, average and inrush
recording to capture varia-
tions automatically
• 500 mV dc measurement
range to interface with other
accessories
• 1000 µF capacitance
measurement
Features
• iFlex flexible current probe
™
expands the measurement
range to 2500 A ac while
providing increased display
flexibility, ability to measure
awkward sized conductors
and improved wire access
• CAT IV 600 V, CAT III 1000 V
safety rating
• Integrated low pass filter
and state of the art signal
processing allows for use
in noisy electrical environ-
ments while providing stable
readings