Table of Contents
Advertisement
20
en | Hardware installation
5.3
Installing the camera
5.3.1
Installation steps
1.
2.
Notice!
i
Make sure the safety hook is correctly locked into place.
3.
4.
5.
5.3.2
Camera positioning and rotation
The device is manually adjustable to accommodate different angles and rotations. This is
helpful for capturing specific scenes.
2023-08 | V02 | DOC
Carefully align the camera with the camera base.
Connect the safety cable on the camera to the safety hook located on the right side of
the camera base.
Align the camera with the camera base using the 3 alignment pins located on the
bottom of the camera.
Push the alignment pins into the camera base pinholes.
Tighten the 3 screws (3 Nm) to fix the camera to the camera base.
Note: Make sure that the camera is secured before releasing it.
Installation manual
DINION 7100i IR
Bosch Security Systems B.V.
Advertisement
Table of Contents
