Table 2 Paper Low Setup - TransAct POSjet 1500 Operator's Manual

: / & : / &
: / & : / &
Use the following table to decide how much paper you want to remain after paper low sensing has occurred.
TransAct's expected results are based on paper and paper roll with these specifications. Refer to "Receipt Paper
(one-ply receipt)" on page 42, and "Paper and Core Diameter" on page 42 for paper measurements.
Paper Low Adjustment Settings
UPPER LIMIT: 3 turns (counter clockwise)
2 turns (counter clockwise)
1 turns (counter clockwise)
FACTORY SETTING
1 turn (clockwise)
2 turns (clockwise)
LOWER LIMIT: 3 turns (clockwise)

Table 2 Paper Low Setup

Revision E
! " ! "
! " ! "
Approximate Paper
Remaining (in feet)
24'
'
22
16'
12'
'
7
'
3.5
1.25'
>
Paper Roll Diameter
1.420" (36mm)
1.375" (34.9mm)
1.250" (31.7mm)
1.175" (29.8mm)
1.050" (26.6mm)
.950" (24.1mm)
.885" (22.5mm)