Philips Aqua Plus 8000 Series Manual page 8

8
User interface signals and their meaning
Signal Description of signal
E1 Red outer circle. Triangle with "!" in the center.
E2 Red outer circle. House icon with blue thermometer. "!" in the
corner.
E3 Red outer circle. House icon with red thermometer. "!" in the
corner.
E5 Red outer circle. Battery icon. "?" in the corner.
E9 Red outer circle. Nozzle icon. "!" in the corner.
i4 Orange outer circle. Nozzle icon. "!" in the corner.
i5
Orange outer circle. Icon
i6 Orange outer circle. Plug icon with arrow pointing downwards.
i7 Red outer circle. Charging cable with triangle and "!".
i8 Orange outer circle. Filter icon. "!" in the corner.
i10 Orange outer circle. Battery icon. "?" in the corner.
Battery icon with low and red volume.
.
Meaning of signal
Malfunction of the appliance.
Remove the battery (Fig. 5), wait 10 seconds, and
then put the battery back. If this does not work,
please take the appliance to a Philips service
center or contact the Consumer Care Center.
The appliance is operated below the functioning
temperature.
Move the appliance to a warmer room. Do not
store, charge or use the appliance at a
temperature below 5 °C or above 40 °C.
The appliance is operated above the functioning
temperature.
Move the appliance to a cooler room. Do not
store, charge or use the appliance at a
temperature below 5 °C or above 40 °C.
The battery is damaged.
Take the appliance to a Philips service center or
contact the Consumer Care Center.
The nozzle is operated above the functioning
temperature.
Switch off the appliance and wait 15 minutes.
Touch the upper housing of the nozzle to feel if it
is still warm. If the nozzle is still warm, wait
longer for the nozzle to cool down. Once the
nozzle has cooled down, try switching the
appliance back on.
The nozzle is clogged.
Make sure the appliance is switched off. Clean
the nozzle according to the user manual and
check the tube by removing the tube from the
main appliance. Remove the object in the nozzle
or tube and restart the appliance.
Foreign object is stuck in the airflow passage.
Make sure the appliance is switched off. Clean
the nozzle according to the user manual and
check the tube by removing the tube from the
main appliance. Remove the object in the nozzle
or tube and restart the appliance.
The adapter is not removed.
Remove the adapter before operating the
appliance.
A wrong adapter is used.
Only use the original adapter to charge the
appliance.
The filter is polluted.
Clean the filter (Fig. 7). Follow the instructions on
the screen or in the users manual. You can buy
new filters in the online Philips shop at
www.philips.com/support or at your Philips
dealer.
The battery is not properly inserted.
Remove the battery (Fig. 5), and then put the
battery back. If this does not work, please take
the appliance to a Philips service center or
contact the Consumer Care Center.
The battery level is low and needs to be charged.
Charge the appliance or the battery via the
suggested charging method.