Table of Contents
Advertisement
Suitability test of the paint system for hazardous areas
For the paint systems ordered as standard on explosion-protected machines, verification of the
electrostatic suitability is available.
Such verification is not available for paint systems that are non-standard or specifically
requested by customers. Take into consideration that the provided verification is not valid
for repainting/recoating.
• Use the tested, original paint when recoating or touching up.
• The operating company is responsible for carrying out an electrostatic test of the complete
system.
1MB..1/2/3/4 - shaft heights 63 ... 355
Operating Instructions, 11/2023, A5E52779900A
Description
3.3 Installation
39
Advertisement
Table of Contents
