Installation; Regulations - Siemens SIMOTICS XP 1MB 1 Series Operating Instructions Manual

Description
3.3 Installation
Converter operation (VSD) rating plate
3.3

Installation

Machine design
The regulations and standards used as the basis to design and test this machine are stamped on
the rating plate.
The machine design basically complies with the subsequent standards. Please refer to the EU
Declaration of Conformity for the versions of the harmonized standards referenced.
3.3.1

Regulations

Table 3-1 Applicable general regulations
Feature
Dimensioning and operating behavior
Procedure for determining the losses and
the efficiency of rotating electrical ma‐
chines and inspections
Degree of protection
Cooling
Type of construction
Terminal designations and direction of ro‐
tation
Noise emission
Integrated thermal protection
Starting characteristics of rotating electri‐
cal machines
28
Standard EAC
EN/IEC 60034-1 GOST IEC 60034-1
EN/IEC 60034-2-1 GOST IEC 60034-2-1
EN/IEC 60034-2-2 GOST IEC 60034-2-2
EN/IEC 60034-2-3 GOST IEC 60034-2-3
EN/IEC 60034-5 GOST IEC 60034-5
EN/IEC 60034-6 GOST R IEC 60034-6
EN/IEC 60034-7 GOST R IEC 60034-7
EN/IEC 60034-8 GOST 26772
EN/IEC 60034-9 GOST IEC 60034-9
EN/IEC 60034-11 GOST 27888
EN/IEC 60034-12 GOST IEC 60034-12
GB BS
GB 755 IEC 60034-1
GB/T 1032 BS EN 60034-2-1
BS EN 60034-2-2
BS EN IEC 60034-2-3
GB/T 4942.1 BS EN IEC 60034-5
GB/T 1993 BS EN 60034-6
GB/T 997 BS EN 60034-7
GB/T 1971 BS EN 60034-8
GB 10069.3 BS EN 60034-9
GB/T 13002 BS EN 60034-11
GB/T 21210 BS EN 60034-12
1MB..1/2/3/4 - shaft heights 63 ... 355
Operating Instructions, 11/2023, A5E52779900A