Bolt [1]
3rd
Specified angle
90
k. Perform the same procedure with the bolts
[2]–[4] one by one and applying the tight-
ening sequence (f)–(j) as shown for the
bolt [1].
TIP
Do not loosen any other bolt until one bolt is
completely tightened.
Bolt [2]–[4]
2nd
18 N·m (1.8 kgf·m, 13 lb·ft)
3rd
Specified angle
90
l. Retighten the bolt (cylinder head) in the
proper tightening sequence.
Final
Specified angle
60
m. Tighten the bolts to the specified torque.
Bolt [5], [6]
12 N·m (1.2 kgf·m, 8.9 lb·ft)
LOCTITE®
90˚
5-21
CYLINDER HEAD