If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents.
Si el paquete ha sufrido un manejo de poco cuidado, golpes o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro de las 24 horas, de modo que podamos iniciar una reclamación con la compañia.
Page 5
Safety and Warranty training regarding the use of the device in a safe manner and understand the dangers involved. Children should not play with the device. Cleaning and maintenance to be performed by the user should not be carried out by children without supervision. •...
Page 6
1 YEAR PARTS AND LABOR WARRANTY Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized service technician to repair the equipment locally. Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not improper use.
Installation SET UP OF THE OPTIONS STAINLESS STEEL SELF-TAP 1. Thread the stainless steel self-tap assembly to the support. SELF-CLEANING SYSTEM 1. Connect the juicer to the water supply through the socket at the rear of the machine. The connection must be made using a G 1/4” female thread. This system is prepared to work between 1.5 and 3 bars of pressure.
Operation LEVEL DETECTOR OPTION 1. Turn on the control display. Press and hold start for 2 seconds. 2. Activate the level detector. Press the start button. 3. Start of squeezing. The machine will start the squeezing operation automatically when the tank level detector detects that it is not at the “maximum level”.
Page 11
Maintenance • Keep the waste bins empty and clean. • Follow the specific cleaning steps below. • It is recommended that the fruit be washed before being subjected to the squeezing process. The self-cleaning option allows a quick wash of the squeezing area, facilitating perfect hygiene and leaving your juicer ready for the next squeezing process.
Page 12
Maintenance 3. Remove the feeding tube by sliding it forward. 4. For TOP, FASTTOP and BIGTOP juicers: unscrew the thumbscrew securing the turning feeder plate and remove the head and the feeding basket. Clean all the parts perfectly, as well as the machine block with water and detergent.
Troubleshooting FAILURE CAUSE SOLUTION The machine does not operate. Machine unplugged. Plug it to socket. No power. Check the plug and socket. Transparent cover misplaced. Make sure it is well placed. Defective safe detectors. Call customer service. Defective ON/OFF button. Call customer service.
Page 14
Troubleshooting Maintenance stop reached. In case of cleaning, remove juicers. *Motor overheating. Check if any piece or part is blocking or hindering machine turn. Voltage input out of range. Check voltage supply. Control fuse damaged. Replace fuse (10A) on control board.
Page 16
Parts Breakdown Model JE-ES-0028N-T 47959...
Page 17
Parts Breakdown Model JE-ES-0028N-T 47959...
Page 18
Parts Breakdown Model JE-ES-0028N-T 47959 Item No. Description Position Item No. Description Position Item No. Description Position DC Hose Fixing PG9 V-Tec 9GR for AO256 Cover Screen Bal for 47959 00029 72657 00211 AO264 DC Valve for 47959 00750 47959...
Page 19
Parts Breakdown Model JE-ES-0028N-T 47959 Item No. Description Position Item No. Description Position Item No. Description Position AO276 Rustless Feeder Shaft for 47959 00913 AO278 Turning Feeder Plate for 47959 00919 64876 Self Service Inox Tap Kit for 47959 70008...
Page 20
Parts Breakdown Model JE-ES-0028N-BB 47960...
Page 21
Parts Breakdown Model JE-ES-0028N-BB 47960...
Page 22
Parts Breakdown Model JE-ES-0028N-BB 47960...
Page 23
Parts Breakdown Model JE-ES-0028N-BB 47960 Item No. Description Position Item No. Description Position Item No. Description Position AO256 Cover Screen Bal for 47960 00029 72661 Gear Feeder 1 Reduct for 47960 00224 72715 Upper Gear 0 for 47960 00745 AO257 Cover Screen Right Lid for 47960 00030 72662...
Page 24
Parts Breakdown Model JE-ES-0028N-BB 47960 Item No. Description Position Item No. Description Position Item No. Description Position AO274 Front Cover for 47960 00908 AO277 Self-Tapping Insert for 47960 00918 64876 Self Service Inox Tap Kit for 47960 70008 AO275 Gear Feeder for 47960 00911 AO278 Turning Feeder Plate for 47960...
Warranty Registration Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting: Merci d’avoir acheté...
Page 28
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers.