Vestil AHA-KIT Instruction Manual

Height adjustment kit

AHA-KIT Height Adjustment Kit

Receiving instructions:

After delivery, IMMEDIATELY remove the product from the packaging. Inspect it closely to determine

whether it sustained damage during transport. If damage is discovered, immediately record a complete

description of the damage on the bill of lading. If the product is undamaged, discard the packaging.

NOTES:

1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where

the product is used is exclusively the responsibility of the owner/end-user.

2) VESTIL is not responsible for injury or property damage that results from a failure to apply: a)

Instructions in this manual; or b) information provided on labels on the product.

Table of Contents

Signal Words............................................................................................................................ 2

Hazards of Improper Use............................................................................................................. 2

Using the come-along...................................................................................................................... 3-4

Inspections & Maintenance............................................................................................................. 4

Limited warranty............................................................................................................ ............ 5

rev. 12/8/2016

ESTIL

ANUFACTURING

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703

Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868

Fax: (260) 665-1339

www.vestilmfg.com

Instruction Manual

AHA-KIT, MANUAL.doc

ORP

e-mail:

sales@vestil.com

Page 1 of 5

Table of Contents

Need help?

Do you have a question about the AHA-KIT and is the answer not in the manual?

Page 1 2) VESTIL is not responsible for injury or property damage that results from a failure to apply: a) Instructions in this manual; or b) information provided on labels on the product.
Page 2 Complete the height adjustment and reinsert both adjustment pins.  DO NOT modify any part of the cable pullers in any way UNLESS you first obtain written approval from Vestil. Unauthorized modifications automatically void the limited warranty (see p. 5) and might make the AHS-KIT unsafe to use.
Page 3 Step 3: Attach the cable hook (B) to the bottom of the upright. Cable coils Upright Attach fixed hook (A) to cable coils) Upright Attach cable hook (B) to the bottom of the upright Copyright 2016 Vestil Manufacturing Co. Page 3 of 5...
Page 4 4. Extend the cable and inspect it. The cable should be free of frays, numerous broken outside strands, regions where the cable is noticeably narrower than the rest of the cable, internal or external corrosion, severe kinks, crushed regions, and cuts. 5. Tighten all cable fasteners. Copyright 2016 Vestil Manufacturing Co. Page 4 of 5...
Page 5 The warranty period for original dynamic components is 90 days. For wearing parts, the warranty period is 90 days. The warranty periods begin on the date when Vestil ships the product to the warrantee. If the product was purchased from an authorized distributor, the periods begin when the distributor ships the product.