Advertisement
There
is no power
• See if the power
cord became
unplugged.
• Check
for a blown fuse or circuit breaker
or a power
outage.
There
is no picture
• The antenna
could be disconnected.
or sound
• The input mode
could be set improperly.
See page 58.
• The tuner (Auto Tuner Setup)
could be set improperly.
See page 32.
• The TV station
may be having
difficulties.
Check to see if other stations
are working.
Remote
control
is not
• Check
to see that the batteries
are still working
and properly
installed.
operating
properly
or
• Make sure the remote
has a clear sight path to the TV.
at all
• Check
that the TV/CATV
switch
is in the proper
position.
• You may be too far from the TV. You must be within 23 feet (7 meters).
You cannot select
a
• Make sure the channels
have been programmed.
See "Channel
Summary",
page 32.
certain
channel
• Check
to see if the channel
is locked. See "Channel
Summary
- Lock"
page 33.
The power
turns off
• Make sure the set did not become
unplugged.
by itself
• Perhaps
the On/Off
Timer is set. See page 55.
• Check
to see if the Sleep Timer was set. See page 60.
The clock is wrong
• The power
was interrupted
and the clock was not reset. See page 54.
The color quality
• Tint and Color may be improperly
adjusted.
See page 50.
is poor
• The Video Status
mode may be turned
to the wrong
setting.
See page 60.
There
are lines
• There
could be interference
from another
electrical
appliance,
such as a computer,
across
the picture
another
TV or VCR. Move any such appliances
further
away from the TV.
The picture
is spotted
• There
could be interference
from a high-wattage
appliance,
like a hairdryer
or vacuum,
operating
nearby.
Move the antenna
away from the appliance
or change
to a coaxial
cable connection
which is less prone to interference.
There
are double
• A building
or passing
airplane
can reflect
the original
signal and produce
a second,
pictures
(ghosts)
slightly
delayed
one.
Adjust
your antenna
position.
Picture
is snowy
• Your antenna
may be damaged,
disconnected
or turned.
Check
the antenna
(image
noise)
connection.
If the antenna
is damaged,
replace
it.
Screen
is 40% black
• The Closed
Caption
Text mode
is on. Turn it off in the Closed
Caption
Menu,
page 44.
Stereo
or bilingual
• Make sure the MTS settings
are correct.
See page 53.
programs
can't be
heard
There
is no sound
• The Center
CH Input may be turned on. See page 49.
from the TV's
speaker
Static
electricity
• It is normal
to feel static electricity
if you brush
or touch the screen.
You hear occasional
• It is normal
for the TV to make crackling
sounds
when first turned
on or off. Unless
crackling
sounds
the sound
or picture
become
abnormal,
this is fine.
The AUTO
DEMO
• The TV recieved
a signal from the AV CompuLink
finished
automatically
• The On Timer that you programmed
has started.
• The channel
that theAUTO
DEMO
is using is a channel
that is blocked
by V-Chip.
• TheAuto
Shut Off that you programed
has occured.
Advertisement
